Roche OMNI C, Instructions For Use Manual

Page: 25 / 152

1 Introduction
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
1-17
1. Attach power cord and barcode scanner
• Plug the power cord into the power supply (Fig. 9/1).
Connect the barcode scanner and, if necessary, the network cable (Fig. 9/2) to the
respective interface(s) (Fig. 9/3) on the reverse side of the Roche OMNI C.
Fig. 9
• Open the bottle compartment cover and the docking mechanism.
Fig. 10
• If available (optional equipment), install the AutoQC module.
(1)
(3)
(2)
docking mechanism