Roche OMNI C, Instructions For Use Manual

Page: 22 / 152

1 Introduction
1-14
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
1.7.9 Reverse side
Interface
Only data processing units manufactured according to the standards IEC 950 (UL1950) may
be attached to the interface connections!
Fig. 5
• COM 1* RS 232 interface
• COM 2* RS 232 interface
•
Barcode PS/2 DIN—6p jack
• Network 10 BaseT Ethernet (RJ45)
*TIP: Always use a filter adapter when using the serial interface. Please order this part from
your customer service representative!
COM 1
This interface can be assigned to a ticket printer and Host FMT.
For an exact description of the assignment, see the section " Settings > Interfaces > COM 1 "
in chapter 3, " Operating modes ," of the Reference Manual.
COM 2
This interface can be assigned as serial interface to ASTM.
For an exact description of the assignment, see the section " Settings > Interfaces > COM 2 "
in chapter 3, " Operating modes ," of the Reference Manual.
COM 1 COM 2
network connection
barcode scanner