Roche OMNI C, Instructions For Use Manual

Page: 88 / 152

5 Quality control
5-10
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
Fig. 10
When inserting the needle into the ampoule, it is absolutely necessary to avoid
contact between the ampoule and the filling port. The sharp edge can cause dam-
age to the filling port.
• The QC sample is suctioned inward into the machine.
Fig. 11
•
Remove the ampoule and close the flap.
• The measurement starts automatically.
• If the user does not reject the results, they are printed and automatically saved in the
QC database.
Details about the operating mode "
Database " can be found in chapter 8, " Operating
modes ", and in the reference manual, chapter 3.
5.5.2 AutoQC measurement
The AutoQC measurement can be retrieved programmatically or manually.
For this purpose, activate the corresponding AutoQC material (AUTO-TROL TS) and the
selected level (e.g. level 1).
Start the AutoQC measurement by pressing .