Roche OMNI C, Instructions For Use Manual

Page: 123 / 152

7 Trouble shooting
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
7-3
7.2 List of system stops
7.2.1 3001 Measuring chamber cover open
Cause
• The measuring chamber cover is open
• The measuring chamber cover sensor (hall sensor) is defective
• The measuring chamber cover cable is defective
Remedy
• Close measuring chamber cover
• Check the measuring chamber cover sensor ("More functions > System > Test > Control
sensors > Monitoring sensors")
• In case of recurrence, call customer service (check cable, change components if neces-
sary)!
Consequence actions
1. 1. After opening for longer than 5 seconds: Warm-up
2. Wash
3. After changing (an) electrode(s): system calibration
7.2.2 3002 Bottle compartment cover open
Cause
•
The bottle compartment is open
• The bottle compartment cover micro switch is defective
Remedy
• Close bottle compartment cover
•
Check to be sure that the bottles are inserted completely
• Check the bottle compartment cover micro switch ("More functions > System > Test >
Control sensors > Monitoring sensors")
• In case of recurrence, call customer service (bottle compartment cover micro switch
change if necessary)!
Consequence actions
• C1 changed: prepare solution C1, fill FMS reservoir, conductivity calibration
• C2 changed: prepare solution C2, fill FMS reservoir, conductivity calibration
• C3 changed resp. C3 docking mechanism micro switch operated: prepare C3 solutions
• Waste container changed resp. micro switch operated: Waste container fill level meas-
urement