Roche OMNI C, Instructions For Use Manual

Page: 84 / 152

5 Quality control
5-6
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
This screen shows the assignment of the selected mat.
corresponds to a full ampoule
corresponds to an empty ampoule
The assignment of the mat can be freely defined by selecting or deselecting individual
ampoules.
TIP: The AutoQC cover must be open for this purpose.
5.4.2 Setting QC times
Depending on the selected material, this function is used to select the start time(s) for the
AutoQC measurement(s) and/or the time for performing a manual QC measurement. After
reaching the set time, a note appears in the message window.
Fig. 6
Up to 16 time entries per weekday can be made for the time setting, such as when an AutoQC
measurement should be started. Up to 6 materials (= 6 mats for the AutoQC) can be speci-
fied for each time.
A little marker (small magenta-colored triangles) on the time scale indicates the defined
start time(s).
Setting start time(s)
Select the day from the "Day of Week" list on which the QC measurement
should be performed.
Add a new time entry (you can remove it again with ).