Roche OMNI C, Instructions For Use Manual

Page: 102 / 152

6 Maintenance
6-8
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
• Open the docking mechanism and remove the bottles that are to be exchanged (see
Fig. 7).
Fig. 7
Dispose of the bottles according to local regulations (hazardous waste!)
• Next, scan in the barcode of new bottle.
• If a barcode scanner is not available, enter the correct barcode with the numerical key-
board and confirm your entry.
• The Roche OMNI C recognizes the correct solution and checks the expiration date. The
respective bottle blinks on the screen.
If the bottle has passed the expiration date, the screen displays a warning.
Reuse of this bottle can lead to errors during calibration! Insert another bottle
that has not yet expired.
Remove rubber sealings from C3 Fluid Pack before inserting it!
• Push the bottle onto the proper position until it engages.
• Close the docking mechanism.
After inserting a full bottle, confirm with .
If inserting a bottle that has already been partially used, press the button and
enter the fill level.
TIP: Use the markings on the label to estimate the fill level of a bottle that is partially
full.
• A numerical keyboard appears on the display. Enter the correct fill level in % and con-
firm with the OK button.
• Close the bottle compartment cover. The solutions are automatically aspirated upwards
(detection in the flap).