Roche OMNI C, Instructions For Use Manual

Page: 39 / 152

1 Introduction
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
1-31
• Begin the tube washing procedure by pressing the button.
4. Remove the shutdown kit.
• Remove the shutdown kit.
TIP: Remove the remaining fluid from the tubes of the shutdown kit by briefly holding
the tubes vertically, allowing the fluid to run back into the container.
• Start the procedure for emptying the tubes by pressing the button.
5. Remove the waste water bottle
•
Then remove the waste water bottle (W waste container).
6. Return the V2 and V9 tube ends to the guides
• Return the air mixture valve tube (valve V2) to the guides.
• Return the ventilation tube (valve V9) to the guides (see Fig. 36).
Fig. 36
• Close the docking mechanisms.
7. Remove the pump tube
• Open the instrument cover.
• Open the peristaltic pump's clear plastic cover (tension lever). Push the linear clamp
(white plastic piece) upwards (see Fig. 37).
Air mixture valve tube V2
Ventilation tube V9