Roche OMNI C, Instructions For Use Manual

Page: 81 / 152

5 Quality control
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
5-3
5.3 Material setup
TIP: Take the batch number, expiration date, sample type, and target values (ranges) as
well as the corresponding barcodes from the text included in the recommended QC
material.
The QC material must be defined prior to the QC measurement.
The barcode scanner facilitates easy entry of the required information.
Press the following buttons:
> QC materials > Set ranges
Up to 4 different QC materials with 4 levels each can be entered.
Fig. 1
Use the "line down" button to select the material to be changed or to select a new "QC mate-
rial".
Using the barcode scanner to enter data
Use the barcode scanner to enter the material code found on the packaging insert.
The material code contains the information for the material, the proper level, batch num-
ber, expiration date, and sample type.
Scan in two barcodes (the BG and tHb/SO
2
code and the ISE code) for the set ranges. The
Roche OMNI C automatically assigns these.
Manual entry
Use the button to manually enter batch number, expiration date, sample type and
target values.
Complete and save the entry by pressing twice .