Roche OMNI C, Instructions For Use Manual

Page: 82 / 152

5 Quality control
5-4
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
5.4 Inserting AutoQC mats
Insert the mats as follows in the ampoule block:
•
Open the cover of the AutoQC module.
• Take a full mat (20 ampoules) from the package.
• To mix the QC material, turn the mat twice so that the ampoules point up. Next, insert
the mats in the ampoule block with the ampoule necks pointing down (see Fig. 2/1).
Fig. 2
• Place the mat in the defined position (A-F) of the ampoule block (the ampoules must
no longer be visible, see Fig. 2/2).
• Repeat the same process for all additional mats.
• Close the cover of the AutoQC module.
5.4.1 Material assignment -
AutoQC materials
Before beginning an AutoQC measurement, the selected AutoQC material must be assigned.
Fig. 3
Use to select the mat to be defined (A-F).
Inserted mats
AutoQC ampoule block
(1)
(2)