Roche OMNI C, Instructions For Use Manual

Page: 105 / 152

6 Maintenance
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
6-11
Using the empty C1 calibration solution 1 bottle as W waste container
• Remove the sticker from the empty bottle of C1 solution (see Fig. 12).
TIP: This sticker may not be reused – discard immediately.
Fig. 12
Installing the waste container
• Push the bottle to the position for " W " until it engages.
• Close the docking mechanism and confirm.
• The fill level monitoring feature recognizes the waste container as "empty".
• When inserting a bottle that is not completely empty, press the button.
A numerical keyboard appears on the display. Enter the approximate fill level in % and
confirm with the OK button.
• Close the bottle compartment cover.
CAUTION! If the W waste container is mistakenly reused as C1 calibration
solution 1, a section of the tubing must be exchanged!
Please contact customer service immediately!
"W" sticker on the bottle of C1.
Pull off the sticker beginning
from the lower right corner
(arrow) until the sticker
"Waste" is completely visible.
Remove the C1 sticker from the
bottle at this position.