8. USAGE EXAMPLE
IMR01Y35-E3
96
To set a dynamic data request item, set the following as shown below.
a dynamic data request item (Dynamic I/O word) are set in the configuration settings as
shown below.
Input Start address (I Address): 100
End address (I Address): 105 (Automatically assigned)
Output Start address (Q Address): 100
End address (Q Address): 105 (Automatically assigned)
As such, set the following values in “Address” of the variable table.
Input IB100: Attribute
(1-byte)
IB101: Device address (1-byte)
IW102: Communication item address (1-word)
IW104: Communication item data (1-word)
Output QB100: Attribute (1-byte)
QB101: Device address (1-byte)
QW102: Communication item address (1-word)
QW104: Communication item data (1-word)
For contents of dynamic data request, refer to
6.2.3 Dynamic data request (P. 23)
.
