8. USAGE EXAMPLE
IMR01Y35-E3
95
8.
Set the static data write request items.
In the configuration settings, the PLC register addresses of the static data write request item
(“Static output word”) are set as follows:
Output Start address (Q Address): 10
End address (Q Address): 17 (Automatically assigned)
As such, set “QW10,” “QW12,” “QW14,” and “QW16” in “Address” of the variable table.
(QW10: A one-byte data area [address 10 and 11] is allocated in address 10 and the data of
address 10 is written.)
Follow the same procedure as in step 7 to change the display format of “QW10,” “QW12,”
“QW14,” and “QW16” from HEX to DEC.
