8. USAGE EXAMPLE
IMR01Y35-E3
84
2.
Set the number of data of the communication item in “Number of Channel” in “Device-specific
parameters.” In this example, “4” is set for the “Number of continuous accesses” (because there
are four modules).
For “Continuous access enable selection,” “Static data read range,” and “Static data write
range,” set “5.”
3.
Set the number of read/write items to “Group read/write allocation.”
In this example, the number of read items set to 1, and the number of write items, to 39.
The number of items that can be set by the COM-JG is 40 maximum including both read
and write items.
If you are setting “Static data read range” and “Static data write range” at the same time,
set 2 read items and 38 write items.
Sets “4”
Sets as 1 read item and
39 write items
