Ricoh PJ WX4130n, Operating Instructions Manual

Page: 64 / 152

How to use Network Utility
Network Utility is included on the supplied CD-ROM.
1. Insert the CD-ROM in the CD-ROM drive of your computer.
2. Specify a language.
The launcher screen appears.
3. Click [PJ Network Utility Type A].
4. Specify a destination to save the application.
The "RICOH PJ NetworkUtility Type A" folder is copied to the computer.
5. To create a shortcut icon on the desktop, click [OK].
6. Close the screen.
To start Network Utility, double-click the shortcut icon on the desktop or "RICOH PJ NetworkUtility
TypeA.exe" in the folder.
• You can also use Network Utility by dragging and dropping the "RICOH PJ NetworkUtility Type A"
folder that is on the provided CD-ROM into the computer or a USB memory device.
• To delete Network Utility, delete the Network Utility folder.
Simple 1:1 Connection
You can connect the computer and projector using a wireless LAN in ad hoc mode.
Make sure the projector's "Connection Method:" is "Simple 1:1 Connection". You can confirm the
projector's "Connection Method:" on Network Information displayed on the screen.
To set the projector's "Connection Method:" to "Simple 1:1 Connection", enable the projector's wireless
LAN connection in ad hoc mode, and then select [Auto] in [Connection Setting] under [Wireless LAN
Settings].
You do not need to specify the wireless LAN settings such as the SSID or the IP address.
1. Turn the projector on.
3. Using the Projector via a Network
62