Ricoh PJ WX4130n, Operating Instructions Manual, Page: 61 / 152

Infrastructure mode
This mode can communicate with networks in which both wireless and wired LAN devices are connected
via a wireless LAN access terminal. It is necessary to user greater security since all communication is via
a network. Use infrastructure mode in environments in which a wireless LAN has already been
configured.
If you use infrastructure mode, make the following settings:
Settings Using Simple Wireless LAN Setup
Action Method Refer to
Wireless LAN settings Simple Wireless LAN Setup
p.59 "Simple
Wireless LAN Setup"
Image projection Network Connection (Network Utility)
p.64 "Network
Connection"
Settings Using a USB Memory Device
If the computer's wireless LAN settings have already been configured, use the following method:
Action Method Refer to
Wireless LAN settings
Write Settings to USB Memory (Network
Utility)
p.65 "Copying
computer settings to
the projector"
Image projection Network Connection (Network Utility)
p.64 "Network
Connection"
Simple Wireless LAN Setup
To use the projector via a wireless LAN, the network settings must be configured. If you use the wireless
LAN simple setup function, the infrastructure settings can be easily configured.
The simple wireless LAN setup function acquires the wireless LAN settings registered in the access point,
and configures those settings for the projector automatically. The access point must also be compliant
with the simple wireless LAN setup function.
Select [Wireless LAN] in [Network Interface] under [Network Settings] beforehand. Further, specify the
IP address and DHCP server using [TCP/IP Settings] in [Wireless LAN].
Setup Method
• Using push buttons
Connecting Using a Wireless LAN
59