Ricoh PJ WX4130n, Operating Instructions Manual, Page: 108 / 152

Display Status
Input
Displays the selected input signals.
Resolution
Displays the resolution.
This item appears when you select [Computer] or [HDMI] as an input signal.
Frequency
Displays the synchronous frequency.
This item appears when you select [Computer] or [HDMI] as an input signal.
Sync
Displays the synchronous signal polarity.
This item appears when you select [Computer] as an input signal.
Signal Format
Displays the Y/Pb/Pr signal format.
This item appears when you select [Y/Pb/Pr] as an input signal.
Video Mode
Displays the video signal color format.
This item appears when you select [Video] as an input signal.
Lamp Time
Displays the lamp usage time.
Lamp Reset Count
Displays the number of lamp replacements.
Total Time
Displays the projector usage time.
Total CO2 Reduction
Displays the total CO
2
amount that can be reduced by setting the lamp mode to eco mode.
Eco Time Ratio
Displays the ratio of the time eco mode was used to the total use time.
Main FW Version
Displays the version of the firmware on the main board.
4. Changing the Projector Settings
106