Ricoh M C250FW, Field Service Manual

Page: 162 / 324

5.System Maintenance
150
Menu Description
Press Left current SC code.
Press Right
Temp.before 2cycles Heat Center Displays the temperature (°C) of
each sensor at the occurrence of
the 2nd fusing SC code before the
current SC code.
Heat NC
Press Center
Press Left
Press Right
Temp.before 3cycles Heat Center Displays the temperature (°C) of
each sensor at the occurrence of
the 3rd fusing SC code before the
current SC code.
Heat NC
Press Center
Press Left
Press Right
Fuser SC
Reset
Fusing SC Reset Resets the fusing related SC.
Hard High Temp. Detection Resets the fusing related SC when
high-temperature detected error
(hardware) occurred.
Init Engine EEPROM Execute this to initialize a new
EEPROM. Turn the machine power
off/on after you execute this
setting.
Also, the following items are
cleared by EEPROM initialization:
•
Machine total counter (total
page, full color, and BW)
•
Error log (listed as “Call
Service” on Maintenance
Page)
•
Duplex page counter
Special Mode ( DFU )
PM Parts Notice Sets whether to display the PM
parts replacement notice and
whether to stop the engine.
[0 to 3 / 2 / 1/step]
•
0: At near end: No notice, At
life end: Notice “Replace Now”
•
1: No Notice
•
2: At near end: Notice, At life