Ricoh IPSiO PJ X3240N, Operating Instructions Manual

Page: 98 / 152

Item Default
Network Key
Enter the WEP key when you select [WEP Shared Key] or [Open
System] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit
WEP, up to 26 characters can be used for hexadecimal and up to 13
characters for ASCII.
Enter PSK when [WPA-PSK] or [WPA2-PSK] is selected in
[Authentication Method].
When using a PSK, up to 64 characters can be used for hexadecimal
and 8 to 63 characters for ASCII.
(blank)
TCP/IP Settings
Item Default
DHCP
Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. If you select [Disable], manually enter the IP
address, subnet mask, and default gateway.
Disable
IP Address
Enter the projector's IP address.
0.0.0.0
Subnet Mask
Enter the subnet mask.
0.0.0.0
Default Gateway
Enter the default gateway.
0.0.0.0
Reset Wireless LAN Settings
Item Default
Reset Wireless LAN Settings
Restore all the wireless LAN settings to their defaults.
-
5. Changing the Projector Settings
96