Ricoh IPSiO PJ X3240N, Operating Instructions Manual

Page: 113 / 152

Problem Solutions
Image is blurred.
Image is partially out of focus. • Make sure the lens is clean.
For details, see page 116 "Cleaning the Lens".
• Check the focus adjustment.
For details, see page 43 "Adjusting the Focus".
• Make sure the projection distance is within the projector's
range.
For details, see page 28 "Relationship Between the
Projection Distance and the Screen Size".
• Check the installation angles of the projector and screen.
For details, see page 41 "Adjusting the Angle of the
Projection".
• Check the settings of [Sharpness] and [Phase] in [Image
Adjustment].
For details, see page 78 "Image Adjustment Menu".
Image is dark. • Check the settings of [Brightness] and [Contrast] in
[Image Adjustment].
For details, see page 78 "Image Adjustment Menu".
• Make sure the lamp is not near the end of its service life.
For details, see page 104 "Display Status".
• Check the settings of [RGB Input Range] in [Image
Adjustment].
For details, see page 78 "Image Adjustment Menu".
• Make sure [3D Projection] in [Display Settings] is set to
[Off].
For details, see page 81 "Display Settings Menu".
Common Problems
111