Ricoh IPSiO PJ X3240N, Operating Instructions Manual

Page: 61 / 152

4. Using the Projector via a Network
This chapter explains the settings for using the projector via a network. This chapter also explains the
operations that use QuickProjection.
Before Connecting to a Network
The supported network interface differs depending on the model.
Wired LAN Wireless LAN
RICOH PJ X3340N Supported Supported
RICOH PJ WX3340N Supported Supported
RICOH PJ X4240N Supported Not supported
RICOH PJ WX4240N Supported Supported
The projector does not support the Windows Vista and Windows 7 Network Projector function. Use
QuickProjection, which is the application provided with the projector for projecting images via a
network. For details about QuickProjection, see page 68 "Projecting a Computer's Screen via a
Network".
Connecting an Ethernet Cable
• Do not place the power cord and connection cable in a way that might cause someone to trip
and fall. The product might fall over and cause an injury.
The projector is compatible with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet interfaces.
Status of the network connection
You can confirm the status of the network connection by the patterns in which the LEDs on the
Ethernet interface light up. If the projector is not connected to a network, no LEDs light up.
CUD084
1 2 3
1. When 1000BASE-T is active (orange and green LEDs light up)
59