Ricoh IPSiO PJ X3240N, Operating Instructions Manual

Page: 114 / 152

Problem Solutions
Color is faded.
Tint is poor. • Check the settings of [Color Saturation], [R-level], [G-
level], and [B-level] in [Image Adjustment].
For details, see page 78 "Image Adjustment Menu".
• Make sure the screen is clean.
• Check the settings of [Wall Color Mode] in [Display
Settings].
For details, see page 81 "Display Settings Menu".
• Make sure the lamp is not near the end of its service life.
For details, see page 104 "Display Status".
The projector's operation keys do
not respond. • Make sure [Key Lock] in [Default Settings 2] is not set to
[On].
For details, see page 89 "Default Settings 2 Menu".
The remote control does not
respond. • Make sure the ID assigned to the remote control and in
the settings of [Remote Control ID] in [Default Settings 2]
are the same.
For details, see page 89 "Default Settings 2 Menu".
• Make sure the batteries in the remote control are not
dead.
• Make sure the batteries are correctly loaded into the
remote control.
For details, see page 23 "Loading Batteries into the
Remote Control".
• Make sure the remote control is inside its effective range.
For details, see page 22 "Effective Range of the Remote
Control".
• Make sure there is nothing placed between the remote
control and the projector.
• Make sure the remote control receiver is not exposed to
strong light.
Display language is unknown. • Press the [Menu] button, and then select the display
language in [Language / XXX] (XXX indicates the current
display language) on the [ ] tab.
For details, see page 89 "Default Settings 2 Menu".
6. Troubleshooting
112