Ricoh IPSiO PJ X3240N, Operating Instructions Manual

Page: 88 / 152

Item Default
Power Off on No Signal
Select the amount of time from the last input signal or operation until the
projector enters standby mode.
• Off
• 5 min.
• 10 min.
• 20 min.
• 30 min.
Off
Power on Standby
Specify whether or not to save energy while in standby.
• Eco
You can save energy while in standby, but start-up time is slower.
• Q'ck On
You can turn on the projector quickly, and the projector starts
projection automatically if the image signals are input even while in
standby. However, the standby energy level is higher.
Eco
NW Settings on Standby
Select a network function to be enabled while in standby. You can save
energy by disabling the network function.
This function is available when you select [Eco] in [Power on Standby].
• Do not Use
Disable the wired LAN and the wireless LAN while in standby to
save energy. To use the wired LAN or the wireless LAN, press the
[Power] button to turn on the projector.
• Wired LAN
You can turn on the projector from standby mode via a wired LAN.
• Wired/Wireless LAN (RICOH PJ X3340N/WX3340N/
WX4240N only)
You can turn on the projector from standby mode via a wired LAN
or wireless LAN.
Wired LAN
5. Changing the Projector Settings
86