G3 Switch 04
FUNCTION
COMMENTS
0
to
3
Training error detection
threshold
0 - F (Hex); 0 - 15 bits
If the number of error bits in the received TCF is below
this threshold, the machine informs the sender that the
training has succeeded.
4
to
7
Not used
Do not change the settings.
G3 Switch 05
FUNCTION
COMMENTS
0
to
3
Initial Tx modem rate
Bit 3 2 1 0 Setting (bps)
0 0 0 1 2.4 k
0 0 1 0 4.8 k
0 0 1 1 7.2 k
0 1 0 0 9.6 k
0 1 0 1 12 k
0 1 1 0 14.4 k
Other settings - Not used
These bits set the initial starting modem rate
for transmission.
Use the dedicated transmission parameters
if you need to change this for specific
receivers.
4
to
5
Initial modem type for 9.6 k or 7.2 kbps.
Bit 1 Bit 0 Setting
0 0 V.29
0 1 V.17
1 0 Not used
1 1 Not used
These bits set the initial modem type for 9.6
and 7.2 kbps, if the initial modem rate is set
at these speeds.
6
to
7
Not used
Do not change the settings.
Ser
v
ice
T
abl
es
December 21st, 1995
SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-51
