Communication Switch 0A
No
FUNCTION
COMMENTS
0
Point of resumption of
memory transmission upon
redialing
0: From the error page
1: From page 1
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page.
1
to
6
Not used
Do not change the settings.
7
Emergency calls using 999
0: Enabled 1: Disabled
If this bit is at 1, the machine will not allow you to dial
999 at the auto-dialer. This is a PTT requirement in the
UK and some other countries.
Communication Switch 0B
No
FUNCTION
COMMENTS
0
Use of Economy
Transmission during a
Transfer operation to End
Receivers
0: Disabled 1: Enabled
These bits determine whether the machine uses the
Economy Transmission feature when it is carrying out
a Transfer operation as a Transfer Station.
1
Use of Economy
Transmission during a
Transfer operation to the
Next Transfer Stations
0: Disabled 1: Enabled
2
Use of Label Insertion for
the End Receivers in a
Transfer operation
0: Disabled 1: Enabled
This bit determines whether the machine uses the
Label Insertion feature when it is carrying out a
Transfer operation as a Transfer Station.
3
Conditions required for
Transfer Result Report
transmission
0: Always transmitted
1: Only transmitted if there
was an error
0: When acting as a Transfer Station, the machine will
always send a Transfer Result Report back to the
Requesting Station after completing the Transfer
Request, even if there were no problems.
1: The machine will only send back a Transfer Result
Report if there were errors during communication so
that one or more of the End Receivers could not be
contacted.
4
Printout of the message
when acting as a Transfer
Station
0: Disabled 1: Enabled
When the machine is acting as a Transfer Station, this
bit determines whether the machine prints the fax
message coming in from the Requesting Terminal.
Ser
v
ice
T
abl
es
December 21st, 1995
SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-45
