System Switch 14
No
FUNCTION
COMMENTS
0
to
7
Wait time between pages in
printer mode (with an
optional printer interface
unit)
05 to 64 (H) (5 to 100s) - This setting determines the
machine’s wait time between pages in printer mode.
A longer setting forces the fax machine to wait until the
end of printer interface output before printing any
incoming fax message.
A shorter setting allows the fax machine to print
incoming fax messages while printing from a computer.
If the controller takes more than the specfied time to
process a page of data from the host computer, the fax
machine releases the printer resources for fax output.
Default setting: 0A(H) = 10 s
System Switch 15 - Not used (do not change the settings)
System Switch 16
No
FUNCTION
COMMENTS
0
Function Upgrade Card or
Fax On Demand Card
0: Not installed
1: Installed
Change this bit to 1 after installing a Function Upgrade
Card or a Fax On Demand Card in the machine’s
lower IC card slot.
0: When either a Function Upgrade Card or a Fax On
Demand Card is installed in the machine’s lower IC
card slot before power-off, all the data in these cards
will be initialized if the machine does not detect the
card at the next power-on.
1: When either a Function Upgrade Card or a Fax On
Demand Card is installed in the machine’s lower IC
card slot before power-off, the machine does not start
up unless the machine detects the IC card or the data
copy tool at the next power-on. This prevents the data
inside the card from being initialized while replacing
PCBs or downloading software.
1
to
7
Not used.
Do not change the default setting.
System Switch 17 - Not used (do not change the settings)
System Switch 18 - Not used (do not change the settings)
System Switch 19 - Not used (do not change the settings)
System Switch 1A - Not used (do not change the settings)
System Switch 1B - Not used (do not change the settings)
System Switch 1C - Not used (do not change the settings)
System Switch 1D - Not used (do not change the settings)
System Switch 1E - Not used (do not change the settings)
System Switch 1F - Not used (do not change the settings)
Ser
v
ice
T
abl
es
December 21st, 1995
SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-35