2.2. PRINTING
2.2.1. Printing Process - Overview
This machine uses a "write to black" system, using negative toner.
•
The charge corona wire gives the drum surface a negative charge
of about -750 V.
•
The exposed area on the drum drops to about -100 V.
•
The development roller carries toner to the latent image on the drum sur-
face. The bias voltages during printing are as follows:
Toner application roller : -700 V
Development roller: -400 V
•
The transfer roller pulls the toner from the drum onto the paper.
A constant current of +4
µ
A is applied. The antistatic brush helps to
separate the paper from the drum.
•
The cleaning blade removes any toner remaining on the drum after the
image is transferred to the paper.
•
The quenching lamp reduces the negative charge on the drum to about
-50 V.
H515D550.wmf
Detai
led De-
scr
ip
ti
ons
DETAILED SECTION DESCRIPTIONS
December 21st, 1995
PRINTING
2-14
