Ricoh B286, Service Manual

Page: 292 / 622

SP1-xxx Feed
B286/B289 5-22 SM
5.7 SP1-XXX FEED
1001 Leading Edge Registration
1 1
st
Roll
2 2
nd
Roll
3 Cassette
5 By-pass Feed
Adjusts the leading edge registration for printing. To move the
image down the page, increase the value.
[-10.0 to +10.0/ 0 /0.1 mm step]
1002 Side-to-Side Registration
1 1
st
Roll
2 2
nd
Roll
3 Cassette
5 By-pass Feed
Adjusts the side-to-side registration for printing.
[-10.0 to +10.0/ 0 /0.1 mm step]
! To move the start position to the right, increase the
value (+).
! To move the start position to the left, decrease the
value (–).
Note : If you use paper 914 mm wide, adjust within the
range of ±2 mm. If you set the adjustment outside this
range, part of the image will be cut off.
1105 Fusing Temperature Adjustment
Be sure to switch the main power switch off and on after adjustment.
1 Copy Ready Temperature
Sets the copy ready fusing temperature. The
setting is the difference from the target fusing
temperature that is set with SP1931. DFU
[0 to +20/10/1°C]
Copying can start at this temperature before
the hot roller reaches its target temperature
(SP1931).