manualshive.com logo in svg

Ricoh B286, Service Manual

The Ricoh B286 Service Manual is a comprehensive guide for maintaining and repairing your printer. This manual provides detailed instructions on troubleshooting, disassembly, and servicing procedures. Download it for free from manualshive.com to keep your printer in top working condition.

Share
Download
background image

Main Machine Installation (B286) 

SM 1-17 

B286/B289 

Inst

allation 

 

 

5.  Open a 1 kg pack of developer and pour it into the development unit. 

 

!

 

Do not add the second pack at this time. 

!

 

Open the first pack of developer [1]. 

!

 

Slowly add the developer from the first pack into the development unit, as you 

move the pack from left to right until the pack is empty. 

!

 

An equal amount of developer must be spread along the entire open slot of the 

development unit.   

6.  Close the toner hopper cover [2]. 

7.  Close the upper unit [3]. 

8.  Connect the power supply cord. Switch the main power switch on. The main motor 

switches on and distributes the developer evenly inside the development unit. 

9.  Wait about 10 sec.   

10.  Turn the main power switch off. 

11.  Disconnect the power cord. 

12.  Open the upper unit. 

13.  Open the toner hopper cover. 

14.  Open the second 1 kg pack of developer, then slowly add it to the development unit. 

Move the pack from left to right until it is empty.   

15.  Use a clean cloth to clean the edges around the slot of the development unit. 

16.  Close the upper unit. 

Toner Cartridge Installation 

To prepare a toner cartridge for installation 

Summary of Contents for B286















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for B286

Brands by name

Popular brands

Load more brands