Ricoh B286, Service Manual

Page: 423 / 622

SP5-xxx Mode
SM 5-153 B286/B289
Service
Ta
bles
5860 SMTP/POP3/IMAP4
Partial Mail Receive Timeout
20
[1 to 168/72/1]
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is
not received during this prescribed time.
MDN Response RFC2298Compliance
21
Determines whether RFC2298 compliance is switched on for MDN reply mail.
[0 to 1/1]
0: No
1: Yes
SMTP Auth. From Field Replacement
22
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
[0 to 1/1]
0: No. “From” item not switched.
1: Yes. “From” item switched.
SMTP Auth Direct Sending
25
Occasionally, all SMTP certifications may fail with SP5860-6 set to “2” to enable
encryption during SMTP certification for the SMTP server. This can occur if the
SMTP server does not meet RFC standards. In such cases you can use this SP
to set the SMTP certification method directly. However, this SP can be used only
after SP5860-3 has been set to “1” (On).
Bit0: LOGIN
Bit1: PLAIN
Bit2: CRAM_MD5
Bit3: DIGEST_MD5
Bit4 to Bit 7: Not Used