Ricoh B286, Service Manual

Page: 390 / 622

SP5-xxx Mode
B286/B289 5-120 SM
6 Line determination not supported
7 Error due to fax transmission in progress.
8 Other error
9 Line type identification still in progress. Please wait.
Selection Dial/Push DFU
153
Used only for Embedded RC Gate-M to set the telephone number of the
dial-up access point of the line checked with SP5816-151. If a number is
entered, use that number. If a number is not displayed, use the pre-set value
for that country.
Outside Line Outgoing Number DFU
154
Used only for Embedded RC Gate-M to set the number of the PSTN number
to dial out where Embedded RC Gate-M is used with a PBX system. If a
number is set here, the number will be replaced by the number returned by
the successful execution of SP5816-151.
Dial Up User Name DFU
156
This is the user name for dialing at the access point where Embedded RC
Gate-M is used.
Note : Numbers with spaces or # marks appear enclosed with quotation
marks in the user name.
Dial Up Password DFU
157
This is the password for dialing at the access point where Embedded RC
Gate-M is used.
Note : Numbers with spaces or # marks appear enclosed with quotation
marks in the user name.
Local Phone Number DFU
161
This is the number of the local line where Embedded RC Gate-M is
connected. This is the line used to communicate with the Call Center.
162 Connection Timing Adjustment Incoming DFU