manualshive.com logo in svg

Ricoh B286, Service Manual, Page: 428 / 622

Share
Download
Ricoh B286 Service Manual Download Page 428

SP5-xxx Mode 

B286/B289 5-158 

SM 

5974 

Cherry Server 

Japan Only

 

 

Selects which version of the Scan Router application program, “Light” or 

“Full (Professional)”, is installed. 

[0 to 1 / 0 / 1 /step] 

0: Light version (supplied with this machine) 

1: Full version (optional) 

 

5985 

Onboard Device Setting 

 

The NIC and USB support features are built into the GW controller. Use this SP 

to enable and disable these features. In order to use the NIC and USB 

functions built into the controller board, these SP’s must be set to “1.” 

[0 to 2/0/1] 

0: Disable

  1: Enable  2: Enable for @Remote 

1  On Board NIC 

 

2  On Board USB 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for B286















































































































































































































































































































































































































































































































































































































































Reviews:

No comments