Ricoh B286, Service Manual

Page: 87 / 622

Table (B854)
SM 1-51 B286/B289
Inst
allation
1. Attach the right joint bracket [1] (the spindle [2] must go through the hole). At the same
time, align the plate with the holes for the three screws (blue).
2. Attach screws , but do not tighten them.
3. While you lift the main machine by its handle [3], set screw in the lower hole of the
keyhole cutout and tighten it.
4. Tighten screws , .
5. Do the above procedure again for the left joint bracket.
6. Reattach the manual feed table (
"
x 2).
7. Reattach the left and right covers (
"
x 3 each)
! Make sure that you attach the longer screws with the fine threads at the rear
sides of the covers.
8. Close the upper unit.
9. Clean the rear plate [1] of the table with alcohol.
10. Attach the harness clamp [2].
11. Clamp the power cord [3] to the table (
"
x 1).