Ricoh B286, Service Manual, Page: 308 / 622

SP1-xxx Feed
B286/B289 5-38 SM
1932 Target Temp: Press.Roller
Sets the target fusing temperature of the pressure roller for plain paper,
translucent paper, and film. These temperatures are used for pressure roller
feedback. Turn the machine power off/on after changing the settings.
Important :
! Modes “1” to “5” below refer to the paper type and thickness settings
selected in User Tools (see “Paper Thickness Default Selection” in this
section).
! After adjusting these SP’s, you must turn the machine power off/on.
1 Plain: Mode1 [60 to 80 /100/5
o
C]
2 Plain: Mode2 [60 to 80 /85/5
o
C]
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
[60 to 80 /60/5
o
C]
6 Trans.: Mode1 [60 to 80 /130/5
o
C]
7 Trans.: Mode2 [60 to 80 /100/5
o
C]
8 Trans.: Mode3
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
[60 to 80 /60/5
o
C]
16 Plain: Low Temp Mode [60 to 80 /120/5
o
C]