Ricoh B246 SERIES, Manual, Page: 71 / 268

71
71
Firmware Update
„
The procedure uses SD
cards.
„
Use the C3 card slot only.
„
Procedure: Service manual,
section 5-4-1
z
If power is turned off during
the procedure, download
the firmware again.
z
If an error occurs, see the
error code and do the
instructions in the error
code table
z
Also see section 4-1-3 for
more information on error
codes
Service manual, section 5-4-1
ˆ
Have the class update the machine firmware.
ˆ
The procedures are all in the manual.
ˆ
‘Downloading Stamp Data’ is not a firmware upgrade. It copies the standard stamp
data from a flash card onto a blank hard disk. After the hard disk has been
formatted, this data is not on the disk. So the data must be copied onto the disk or
the user cannot use any of the standard preset stamps.