manualshive.com logo in svg

Ricoh B246 SERIES, Manual, Page: 158 / 268

Share
Download
Ricoh B246 SERIES Manual Download Page 158

158

158

Drum Unit

Transfer Belt

Drum

Development 
Roller

Pick-off Pawls

Drum 
Cleaning 
Unit

Toner Recycling 
Pipe

Charge Corona Unit

Potential Sensor

ID Sensor

Service manual, section 6.8.1

ˆ

The main components are indicated on the slide. Go over the following points.

¾

OPC Drum (100 mm diameter)

¾

There is a Drum Potential Sensor and ID Sensor

¾

Charge Corona Unit

With cleaning pads

¾

Pick-off Pawls

The spurs rotate and move the pawls into contact and away from the drum 
as they turn.

¾

Cleaning Unit

Counter blade mechanism
Edge cleaning mechanism
Toner recycling (the toner recycling pipe carries toner up to the toner 
hopper, where recyclable toner is separated from waste toner)

¾

Only one development roller in this model - this will be discussed in the 
Development section.

Summary of Contents for B246 SERIES













































































































































































































































































Reviews:

No comments