Ricoh B246 SERIES, Manual, Page: 26 / 268

26
26
Installation Procedure – Main Units (1)
„
Install the copier
z
Adjust the tandem tray to the size required by the user
z
One one machine, install the optional A3/DLT tray kit.
„
Install the LCT
z
Install the LG/B4 feeder kit for the LCT on one LCT before
putting it in the machine
„
Install the finisher but do not dock it to the machine.
z
Install the B706 finisher on one machine, and the B700 or B701
finisher on another machine
z
In the B706 finisher, install the optional jogger unit
„
Install the cover interposer on the finisher
„
Install the optional z-folding unit
z
You can only install this on the B700 or B701 finisher
„
Dock the finisher/cover interposer assembly to the machine
ˆ
Have the class install the copier and its peripherals in the order shown on the slide.
ˆ
The class members must follow the procedures in the manual, and take note
of all warnings and cautions in the procedures.
ˆ
Tandem tray: If the user doesn’t wish to use the default paper size, the technician
has to adjust the tray and change an SP setting. The class must try this on one of
the machines.
ˆ
LG/B4 kit for the LCT: To install this, you have to take the LCT off the machine. So,
have the class do it on one of the LCTs before installing the LCT in the main
machine.
ˆ
The cover interposer tray and the mailbox cannot be installed on the same
machine, so install one of each one separate machines.
ˆ
Scanner/printer controller: At this stage, the class can install drivers and software
on their computers if you wish. However, we are not covering that in this instructors
guide.
ˆ
There is also an optional scanner anti-condensation heater. Have the class install
this also.
¾
The procedure is in the Replacement and Adjustments section of the service
manual (section 3.4.11).
ˆ
The other anti-condensation heaters (transfer belt, paper trays) are standard
equipment, not options.