Ricoh B246 SERIES, Manual, Page: 256 / 268

256
256
SP Modes
„
1103: Fusing idling
z
70 seconds at power on
z
No idling when recovering from low power mode
„
1102, 1105: Fusing temperature adjustments
„
1106: Displays the fusing temperature
„
1901: Copy speed change for thick paper
„
1902, 1903: Web unit settings
„
1906: Displays the readings from the temperature and humidity
sensor (below the toner collection bottle)
„
1907: Idling before fusing, for OHP and thick paper (default:
enabled)
SP Modes
ˆ
1105: Fusing temperature adjustment
¾
There are separate adjustments for OHP and thick paper.
¾
1102: For duplex mode
ˆ
1106: Displays the fusing temperature
ˆ
1901: Copy speed change for thick paper and tab sheets
¾
This counteracts insufficient fusing problems caused by drops in hot roller
temperature due to the thick paper going through the fusing unit (this cools
the fusing unit much quicker than normal paper).
¾
Reduce the speed if these problems occur.
ˆ
1902, 1903: These were discussed earlier in this section.