manualshive.com logo in svg

Ricoh B246 SERIES, Manual, Page: 216 / 268

Share
Download
Ricoh B246 SERIES Manual Download Page 216

216

216

„

Rear fence drive 
motor: Pushes the 
paper stack into 
the right tray

„

Rear fence home 
position/return 
sensors: Detect the 
rear fence home 
and return 
positions

Tandem Feed Tray

Rear Fence Drive

Service manual, section 6.11.8, Rear Fence Drive

ˆ

If the right tray is empty but the left tray is full, the paper in the left tray is moved 
across to the right tray.

ˆ

The rear fence drive motor pushes the paper stack into the right tray.

ˆ

The return sensor detects when the fence is as far as it can go.

ˆ

The rear fence home position sensor detects when the rear fence moves back to 
home position.

ˆ

While the paper stack is being moved across, the left tray is locked using the left 
tray lock solenoid, as shown in the service manual. This stabilizes the left tray while 
the stack is being pushed across.

Summary of Contents for B246 SERIES













































































































































































































































































Reviews:

No comments