Ricoh B246 SERIES, Manual, Page: 224 / 268

224
224
Replacement and Adjustment - 1
„
Tandem tray
z
Tandem tray removal
z
Right tray paper sensor removal
z
Bottom plate lift wire removal
z
Paper size change
„
Trays 1 to 3
z
Pick-up, feed, and separation roller removal
z
Separation roller pressure adjustment
• Adjust if there are jams when feeding in from the paper tray.
z
Feed unit
Service manual, section 3.11
ˆ
Have the trainees do the procedures on the slide.
ˆ
Remind them to follow all notes and cautions in the manual.
Service manual, section 3.1.10
ˆ
First, make sure that the class is aware of the service notes for the paper feed
components.
Tandem tray paper size change
ˆ
The users cannot do this themselves.
ˆ
Don’t forget to change the SP mode setting after changing the size. The users do
not have a user tool to do this if you forget.
ˆ
Do the copy adjustments after changing the paper size. (No need to do this in the
class unless the trainees need practise.)
Pick-up, feed, and separation rollers
ˆ
The rollers in trays 1 to 3 are different from those in the by-pass tray and optional
LCT.
Pressure adjustment
ˆ
Note the use of this adjustment to solve feed problems at the feed-in area.