Ricoh B246 SERIES, Manual, Page: 189 / 268

189
189
How Often is the ID Sensor Pattern
Read?
„
Every 10 copies (SP 2210)
z
Does not stop during a job; a pattern is taken at end of the job if
10 copies were made after the last test
„
Every 100 copies in the middle of a large job (SP 2507)
„
Every 15 minutes in the middle of a large job (SP 2506)
z
The drum cleaning blade is also cleaned. If copies get too pale
or too dark during long jobs, enable this feature using SP 2506
001. If it has no effect, try a shorter interval (SP2506 002).
„
At power on, if process control was not done for 24 hours or
longer (SP 2966)
„
At power on, if all these conditions occur:
z
If fusing temperature is less than 100 C
z
If SP 3901 - Auto Process Control is enabled
z
If SP 3904 is at 2 (see the Process Control section)
„
Forced process control (done with SP 2962)