Ricoh B246 SERIES, Manual, Page: 163 / 268

163
163
When is the Corona Wire Cleaned?
„
Immediately after the machine power is turned on, if one of the
following conditions occurs
z
SP 3904 is at 1 or 2. The default is 0 (not cleaned).
„
At the end of a job, if one of these conditions occurs:
z
The wire was not cleaned for 24 hours or more
• You can change this interval with SP 2966
z
5,000 copies or more were made after the last time that the wire
was cleaned
•
The interval is set with SP 2804 002
• Wire cleaning at a set interval can be enabled or disabled with SP
2804 001
„
Forced cleaning
z
SP 2803