Ricoh B246 SERIES, Manual, Page: 4 / 268

4
4
Product Appearance
Optional Booklet Finisher
Optional Cover Interposer
Optional
LCT
ARDF
(standard equipment)
Three paper trays
(standard equipment)
PRODUCT APPEARANCE
ˆ
The first few slides illustrate what the machine looks like, with some of the options
connected.
ˆ
Here we see a finisher and an LCT attached.
ˆ
The ARDF (capacity: 100 sheets) is standard equipment for this model, not an
option. It has a CIS built in, which allows both sides of a double-sided original to be
scanned at the same time.
ˆ
The three built-in paper trays are as follows:
¾
Tray 1: 1550 sheet x 2, tandem LCT
¾
Trays 2 and 3: 550 sheets each
¾
In addition, the built-in bypass tray has a capacity of 100 sheets.
¾
Optional LCT: 4,000 sheets (2,500 if the LG/B4 kit is installed)
¾
Adding it all up, the machine has a maximum paper capacity of 8,300 sheets
(A4/LT).
ˆ
The tandem tray (main frame, tray 1) can only handle sizes up to A4/LT. The
DLT/A3 tray allows tray 1 to hold sizes up to DLT/A3 (1000 sheets). However, this
will not be a tandem tray.
ˆ
Trays 2 and 3 are adjustable to hold a wide range of paper sizes.
ˆ
The LCT can only handle sizes up to A4/LT. The LCT can be fitted with an LG/B4
option to allow it to hold paper sizes up to LG and B4.
¾
However, if the tray is modified in this way, some short paper sizes, such as
A4SEF, cannot be added, because the end fence will not reach them. A4LEF
can still be used.
ˆ
The cover interposer is used with the finishers. It inserts cover sheets in the
locations specified by the user.