Ricoh AP-P2 G188, Field Service Manual

Page: 247 / 682

3 Any SC Error
Saves data only for the SC code that you specify by entering
code number.
4 Jam Saves data for jams.
• More than one event can be selected.
- Example 1: To Select Items 1, 2, 4
Push the or key to select the appropriate items(s). Press the “OK” key for each selection. This
example shows “Engine SC Error” selected.
- Example 2: To Specify an SC Code
Push the or key to select “3 Any SC Error”, enter the 3-digit SC code number with the or key.
Then press"OK" key. This example shows an entry for SC670.
• For details about SC code numbers, please refer to the SC tables in "Appendices".
6. Select one or more memory modules for reading and recording debug information. Select “SP5859”.
Under “5859” press the necessary key item for the module that you want to record.
Enter the appropriate 4-digit number with the or key. Then press"OK".
• Refer to the two tables below for the 4-digit numbers to enter for each key.
The following keys can be set with the corresponding numbers. (The initials in parentheses indicate
the names of the modules.)
4-Digit Entries for Keys 1 to 10
Key No. Printer
1 2222 (SCS)
2 14000 (SRM)
3 256 (IMH)
4 1000 (ECS)
5 1025 (MCS)
6 4400 (GPS)
7 4500 (PDL)
8 4600 (GPS-PM)
Using the Debug Log
245
5