Ricoh AP-P2 G188, Field Service Manual

Page: 497 / 682

007 PTR:TH5:2st:S4 *ENG
[100 to 600 / 160 / 5%/step]
297 mm > S4 size ≥ 275 mm (Paper width)
009 PTR:TH5:2st:S5 *ENG
[100 to 600 / 190 / 5%/step]
210 mm > S5 size ≥ 148 mm (Paper width)
2694
[Thick5:L Edge Cor]
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2691 and SP2692 are multiplied by these SP values.
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
• The paper leading edge area can be adjusted with SP2695.
001 PTR:1st Side *ENG [0 to 400 / 100 / 5%/step]
2694
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2690 is multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2675.
002 SeparatDC:1stSide *ENG [0 to 400 / 100 / 5%/step]
2695
[Thick 5:LE:Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 PTR:1st *ENG
[0 to 30 / 0 / 1 mm/step]
002 SeparatDC:1stSide *ENG
2696
[Thick5:T Edge Cor] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2691 and SP2692 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2695.
Engine Service Mode
239
8