Ricoh AP-P2 G188, Field Service Manual

Page: 44 / 682

Meter Click
Charge
SP5-930-001
Enables or disables Meter Click Charge.
When enabled:
• The counter menu shows
immediately after you push the
"Menu" key. The "Counter
Method" (SP5-045) sets the type of
the counter.
• You can print the counter from the
counter menu.
When disabled:
• The counter menu does not show.
"0": OFF
Meter Click
Charge: PCU
SP5-930-010
Enables or disables the PM alert for the
PCUs.
If this SP is enabled, an alert message is
displayed when the PCUs need to be
replaced.
"1": No alert
Meter Click
Charge:
Image Transfer
Belt Unit
SP5-930-014
Enables or disables the PM alert for the
image transfer belt unit.
If this SP is enabled, an alert message is
displayed when the image transfer belt
unit needs to be replaced.
"1": No alert
Meter Click
Charge:
Fusing Unit
SP5-930-016
Enables or disables the PM alert for the
fusing unit.
If this SP is enabled, an alert message is
displayed when the fusing unit needs to be
replaced.
"1": No alert
Counter
method
SP5-045-001
Specifies if the counting method used in
meter charge mode is based on
developments or prints.
“1”: Prints
A3/DLT
double count
SP5-104-001
Specifies whether the counter is doubled
for A3/DLT paper. “0”: Single
counting
2. Installation
42
2