Ricoh AP-P2 G188, Field Service Manual

Page: 464 / 682

001 Plain: Bk *ENG
[0 to 200 / 100 / 1%/step]
Increasing this value makes the image density
darker.
002 Plain: M *ENG
003 Plain: C *ENG
004 Plain: Y *ENG
005 Thick 1: Bk *ENG
006 Thick 1: M *ENG
007 Thick 1: C *ENG
008 Thick 1: Y *ENG
009 Thick 2&FINE: Bk *ENG
010 Thick 2&FINE: M *ENG
011 Thick 2&FINE: C *ENG
012 Thick 2&FINE: Y *ENG
2229
[Development DC Vias] Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore, adjusting these
settings has no effect while Process Control (SP3-041-001 Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP modes are used
for printing.
Plain: 205 (P2c)/230 (P2d) mm/sec, Thick 1: 154 mm/sec, Thick 2&Fine: 77 mm/sec
8. Appendix: SP Mode Tables
206
8