Ricoh AP-P2 G188, Field Service Manual

Page: 513 / 682

2912 [Offset Amp Set] DFU
001 Y Drum *ENG
[0 to 100 / 0.0 / 0.1
μ
m/step]
002 C Drum *ENG
003 M Drum *ENG
004 K Drum *ENG
2914 [Shutter Motor] Not used
001 Delay Time Open *ENG
DFU
[1 to 50 / 38 / 1 msec/step]
002 Delay Time Close *ENG
003 Shutter Open *ENG
Opens the shutter on the laser optics housing unit
manually for test purposes.
004 Shutter Close *ENG
Closes the shutter on the laser optics housing unit
manually for test purposes.
2920 [ITB Motor Ctl]
001
0: Encorder 1 :FG *ENG [0 or 1 / 0 / 1 /step]
Selects the speed control mode for the ITB.
If SC443 occurs and machine does not recover, change this setting to "1".
002
SC443 Count *ENG [0 to 3 / 0 / 1 /step]
Displays the number of the ITB encodre error. SC443 is displayed if this counter counts to
"3".
2930
[PTRFB: Threshold] Paper Transfer Roller Feed-back: Threshold Adjustment
Adjusts the threshold between high resistance (division 1) and low resistance (division 2) at
the paper transfer roller. This SP affects SP2931 to SP2939.
001 Voltage *ENG [0 to 7000 / 6000 / 10 –V/step]
2960 [Process Interval]
Engine Service Mode
255
8