No.
Type
Details (Symptom, Possible Cause, Troubleshooting Procedures)
828
CTL
D
Self-diagnostic error: ROM
[XXXX]: Detailed error code
[0101]
Check sum error 1
• The boot monitor and OS program stored in the ROM DIMM is checked. If the
check sum of the program is incorrect, this SC code is displayed.
[0104]
Check sum error 2
• All areas of the ROM DIMM are checked. If the check sum of all programs
stored in the ROM DIMM is incorrect, this SC code is displayed.
-
-
• Defective controller
-
-
1. Turn the main switch on and off.
2. Replace the controller.
No.
Type
Details (Symptom, Possible Cause, Troubleshooting Procedures)
829
CTL
B
Self-diagnosis error: optional RAM
[XXXX]: Detailed error code
[0401]
Verification error (Slot 1)
The data stored in the optional RAM in Slot 1 does not match the data when reading.
[0402]
Composition error (Slot 1)
The result of checking the composition data of the optional RAM in Slot 1 on the
controller is incorrect.
-
-
• Not specified RAM DIMM installed
• Defective RAM DIMM
-
-
1. Turn the main switch off and on.
2. Replace the RAM DIMM.
3. Replace the controller board.
No.
Type
Details (Symptom, Possible Cause, Troubleshooting Procedures)
833
CTL
C
Self-diagnostic error 8: Engine I/F ASIC
3. Appendix: Service Call Conditions
86
3
Summary of Contents for AP-P2 G188
