manualshive.com logo in svg

Ricoh AP-P2 G188, Field Service Manual

Share
Download
Ricoh AP-P2 G188 Field Service Manual Download Page 613

001 Latest

*CTL

-

002 Latest 1

003 Latest 2

004 Latest 3

005 Latest 4

006 Latest 5

007 Latest 6

008 Latest 7

009 Latest 8

010 Latest 9

7801

[Memory/Version/PN]

255 Engine

*CTL

Displays all versions and ROM numbers in the
machine.

7803

[PM Counter Display]
(Page, Unit, [Color])

Displays the number of sheets printed for each current maintenance unit.
PM counters click up based on the number of A4 (LT) LEF size sheets printed. Therefore,
the A3 (DLT) Double Count is activated. The Double Count cannot be deactivated.
When a unit is replaced, the machine automatically detects that the new unit is installed.
Then, the current PM counter value is automatically moved to the PM Counter - Previous
(SP7-906-1 to 10) and is reset to “0”.
The total number of sheets printed with the last unit replaced can be checked with
SP7-906-1 to 10.
NOTE: The LCT is counted as the 3rd feed station.

001 Paper

*CTL

-

Engine Service Mode

355

8

Summary of Contents for AP-P2 G188











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands