Ricoh AP-P2 G188, Field Service Manual

Page: 555 / 682

005 Pixel Count After Replacement *CTL
Displays the pixel counter after replacement
of toner collection bottle.
[0 to 200000 / - / 1 cm
2
/step]
008 Coefficient *ENG [0.5 to 1.5 / 1 / 0.1 /step]
011
Notice Setting *ENG
Enables or disables the calling for @Remote.
[0 or 1 / 1 / - ]
0: Enable @Remote calling
1: Disable @Remote calling
NOTE:
If the toner collection bottle has been replaced before the machine detects used toner near
full when this setting is set to "0", the machine cannot detect toner collection bottle near full.
In that case, set SP3-902-017 to "1".
3900
[New Unit Detection]
Turns toner collection bottle full detection on or off.
001 ON/OFF Setting *ENG
[0 or 1 / 1 / - ]
0: OFF, 1: ON
3901
[New PCU Detection]
Turns new PCU detection on or off.
001 ON/OFF Setting *ENG
[0 or 1 / 1 / - ]
0: OFF, 1: ON
3902
[Manual New Unit Set]
Turns the new unit detection flag for each PM unit on or off.
The use of these counters is explained in the PM section and in the relevant parts of section
3 (Replacement and Adjustment).
001 Development Unit: Bk *ENG
[0 or 1 / 0 / - ]
0: OFF, 1: ON
002 Development Unit: Y *ENG
003 Development Unit: C *ENG
004 Development Unit: M *ENG
Engine Service Mode
297
8